University of Belgrade
Institute of Chemistry, Technology and Metallurgy
National Institute of the Republic of Serbia

grb BUUniversity of Belgrade

Dr Aleksandar Grujić

Full Research Professor





Centre for Materials and Metallurgy, Institute of Chemistry, Technology and Metallurgy,
University of Belgrade, Njegoševa 12, 11000 Belgrade 6, PAK 125213, Serbia
Lab: Faculty of Technology and Metallurgy, Karnegijeva 4, I floor, room 101b.
11120 Belgrade 35, PAK 135804
Telephone: +381 11 3370 412
Fax: +381 11 3370 412
E-mail: gruja@tmf.bg.ac.rs


2002. Dipl. -Ing. Chemical Engineering
2005. MSc Materials Science
2009. PhD Materials Science

Research Ranks:

2015. Full Research Professor


Serbian Chemical Society
Association of Metallurgical Engineers of Serbia

Professional Experience:

2003. – present ICTM – Department for Materials and Metallurgy
2008. Texas A&M University at Qatar, Doha, Qatar

Research Interests:

Magnetic materials, composite materials, membranes and membrane systems, energy efficiency and renewable energy integration

Professional Skills:

Synthesis and testing of composite materials, thermal analysis (DSC, TGA, DTA, DMA)

Language Skills:



Applied Research:
2011 – 2014. III 45019: Synthesis, development of technology production and application of nanostructured multifunctional materials with defined properties
2011 – 2014. TR 34011: Development of equipment and production processes of polymer composite materials with predefined functional properties

Innovative technologies:
2014 – 2015. IP 1-38: Production of a catalyst from the egg shell and its application to biodiesel production from recycled vegetable oils

Major Publications:

Peer reviewed publications:

  1. Mirko Z. Stijepovic, Athanasios I. Papadopoulos, Patrick  Linke, Aleksandar S. Grujic, Panos Seferlis,  An exergy composite curves approach for the design of optimum multi-pressure organic Rankine cycle processes, Energy, 69 (2014) 285-298
  2. Mirko Z. Stijepovic, Athanasios I. Papadopoulos, Patrick Linke, Aleksandar S. Grujic, Panos Seferlis, Design of Multi-pressure Organic Rankine Cycles for Waste Heat Recovery in Site Utility Systems, Computer Aided Chemical Engineering, 33 (2014) 109-114
  3. Markovic Radmila, Stevanovic Jasmina, Gvozdenovic Milica, Jugovic Branimir, Grujic Aleksandar, Nedeljkovic Dragutin, Stajic-Trosic Jasna, Treatment of Waste Copper Electrolytes using Insoluble and Soluble Anodes, International Journal of Electrochemical Science, 8 (5) (2013) 7357-7370
  4. Aleksandar Grujić, Mirko Stijepović, Jasna Stajić-Trošić, Slaviša Putić, Dragutin Nedeljković, Aleksandar Stajčić, Radoslav Aleksić, Dynamic Mechanical Behaviour of Polymer Bonded Nd-Fe-B Composite Materials, Materials Transactions, 53 (2) (2012) 395 – 400.
  5. Stijepovic, V., Linke, P., Alnouri, S., Kijevcanin, M., Grujic, A., Stijepovic, M., Toward enhanced hydrogen production in a catalytic naphtha reforming process, International Journal of Hydrogen Energy, 37(16) (2012) 11772-11784
  6. Mirko Z. Stijepovic, Patrick Linke, Athanasios I. Papadopoulos, Aleksandar S. Grujic, On the Role of Working Fluid Properties in Organic Rankine Cycle Performance, Applied Thermal Engineering, 36 (2012) 406-413.
  7. Aleksandar P. Stajčić, Jasna T. Stajić-Trošić, Aleksandar S. Grujić, Mirko Z. Stijepović, Nada L. Lazić, Tomáš Žák, Radoslav R. Aleksić, Hybrid Nd-Fe-B/barium ferrite magnetic materials with epoxy matrix, Chemical Industry, 66 (3) (2012) 301–308
  8. Aleksandar Grujić, Vladan  Ćosović, Aleksandar Ćosović and Jasna Stajić-Trošić, Nanocrystalline Nd-Fe-B Alloys for Polymer-Bonded Magnets Production, ISRN Nanotechnology, Volume 2012, Article ID 438436, 6 pages doi:10.5402/2012/438436
  9. Nedeljković, D.M., Stajčić, A.P., Grujić, A.S., Stajić-Trošić, J.T., Zrilić, M.M., Stevanović, J.S., Drmanić, S.Z., The Application of  Zeolite Nanopowder for the Construction of the Dense Composite Polymer Membranes for Carbon Dioxide Separation, Digest Journal of Nanomaterials and Biostructures,  7 (1)  (2012) 269-278
  10. Aleksandra R. Nesic, Snezana S. Trifunovic, Aleksandar S. Grujic, Sava J. Velickovic, Dusan G. Antonovic, Complexation of amidated pectin with poly(itaconic acid) as a polycarboxylic polymer model compound, Carbohydrate Research 346 (2011) 2463–2468.
  11. Radmila Markovic, Jasmina Stevanovic, Zoran Stevanovic, Mile Bugarin, Dragutin Nedeljkovic, Aleksandar Grujic, Jasna Stajic-Trosic, Using the Low-Cost Waste Materials for Heavy Metals Removal from the Mine Wastewater, Materials Transactions, 52 (10) (2011) 1849 to 1852.
  12. A. Grujić, V. Ćosović, N. Talijan, D. Stojanović, J. Stajić-Trošić, Z. Burzić, R. Aleksić, Mechanical and Magnetic Properties of Composite Materials with Polymer Matrix, Journal of Mining and Metallurgy, B-Metall. 46 (1) B (2010) 25 – 32

Books and book chapters:

  1. Jasna Stajić-Trošić and Aleksandar Grujić, Permanent Magnetic Materials Nd-Fe-B-type obtained by Rapid Quenched Method, (in Serbian), TMF Belgrade, Serbia, 2015.
  2. Aleksandar Grujić, Mirko Stijepović, Jasna Stajić-Trošić, Jasmina Stevanović and Radoslav Aleksić, Magnetic and Dynamic Mechanical Properties of Nd-Fe-B Composite Materials with Polymer Matrix in: John Cuppoletti (Eds.), Metal, Ceramic and Polymeric Composite for Various Uses, (in English), InTech, Croatia, 2011, pp. 505-524.

Invention disclosures:

  1. Ivona Radović, Mirjana Kijevčanin, Sofija Miškov, Jasna Stajić-Trošić, Aleksandar Grujić, New Ecological Catalyst for Biodiesel Production Obtained by Organic Waste Treatment, 2015
  2. Mirjana Kijevčanin, Slobodan Šerbanović, Ivona Radović, Aleksandar Tasić, Gorica Ivaniš, Jovana Ilić, Jasna Stajić-Trošić, Mirko Stijepović, Aleksandar Grujić, A device for determining the density of the fluid at high pressures and temperatures, 2014.
  3. Aleksandar Grujić, Jasna Stajić-Trošić, Mirko Stijepović, Dragutin Nedeljković, Aleksandar Stajčić, Lana Putić, A device for determining the separation characteristics of the membranes, 2013.
  4. Radoslav Aleksić, Petar Uskoković, Vesna Radojević, Jasna Stajić-Trošić, Dušica Stojanović, Aleksandar Grujić, Dejan Trifunović, Irena Živković, Monolite Nozzle for Co-extrusion of Modified Polymer Optical Fibers, 2011.
  5. Aleksandra Milosavljević, Ana Kostov, Dragana Živković, Nadežda Talijan, Aleksandar Grujić, Radiša Todorović, Ecological Lead Free Solders Ag3-6In10,5-21Cu1,5-3Sn85-70 Type, 2009.