IHTM PLAVI
University of Belgrade
Institute of Chemistry, Technology and Metallurgy
National Institute of the Republic of Serbia

grb BUUniversity of Belgrade

Electroconductive Optically transparent coatings (heating elements)

Electroconductive and optically transparent SnOx coatings deposited on optical glass are used in optical instrumentation as a protection against humidity, condensed water, etc. SnOx layers are heated through DC current flow to disperse condensed water. High transmission, low reflection and negligible optical aberrations enable their use in various high precision instrumental systems.

  • Resistant to water, ice, snow, acids, alkalis, organic compounds
  • Extremely resistant to high and low temperature
  • High transmission, low reflection
  • Reflection R<15%
  • Transmission higher than 80%
  • Dissipation power 0.2 W/cm2 to 0.5 W/cm2
  • Ambient temperature -30oC to +60oC
  • Supply voltage 10V to 30V
  • Resistance 10 W do 30 W
  • Maximum dimensions 300 mm x 300 mm

Department of Microelectronic Technologies

  • CMT announces funding through EU FP7 REGPOT project REGMINA that ensured its reinforcement as a Western Balkan centre of excellence for micro and nanosystems Regmina FP7

  • CMT is accredited by Serbian Ministry of Education, Science and Technological Development as a center of excellence for microsystems and nanosystems.

  • CMT is ISO 9001 Certified.

Contact

centar za mikoelektronske tehnologije

Centre of Microelectronic Technologies

Address:
Njegoseva 12
11000 Belgrade
Offices and Labs:
Studentski trg 16/III,Belgrade
Phone: +381 11 2638 188
Fax:+381 11 2182 995
e-mail:
dana@nanosys.ihtm.bg.ac.rs